Exhibition stand and banner stand design Swansea

We design, organise and supply exhibition stands using the popular curved wall type modules or pull-up banner stands. We now offer a free-standing outdoor banner system as well.

Compact and easy to erect, a four panel unit (3.5m x 2.5m) can be put in place by one person in the space of half an hour and packs down into a wheelable box of approximately 1.2m x 0.7m x 0.5m (which can also convert into a branded lectern unit). Panels may be either laminated graphic drops or Nyloop material for velcro attachments.

Halogen spot lamps can be fitted to floodlight the entire display. Other units such as counters, podiums or display cabinets are also available to order. The images on this page are 3D computer models that are produced to preview the stands for client approval.

This four panel curved wall stand was designed as a backdrop for the Fire Service's media briefings and press conferences. This type of exhibition stand has instant presence in a room and the rather austere graphics relying on one powerful image and a strong corporate colour convey an air of confidence in the service.

These metre wide pull-up stands were designed for Evans Cooling utilising the 3D vortex image created for their website and brochure.

A banner stand design such as this makes an instant impact on the target audience and the pair can be erected from the supplied carry case in a matter of minutes.

Banner stands can be supplied in either 1m or 800mm width x 2.2m height.

We can provide "gold", "silver" or "bronze" standard units to suit all budgets.

banner stand design

This set of fourteen double sided banners were designed for the Ospreys to help inspire the players and intimidate the opposition as they walked through the tunnel onto the pitch.

They are printed on a heavy polycotton and hung from tension wires fitted at ceiling level across the tunnel.

Each panel features a montage of the previous season's most valuable players. (3D mockup shown)

This metre wide stand is printed onto a waterproof material and attaches to a weighted base for use outdoors in most weather conditions.

As with all our supplied stands it is easy to assemble and creates maximum impact for a reasonable cost.

This particular stand has been used at a number of fetes and outdoor exhibitions around the country to great effect.

banner stand design

This set of four, metre wide pull-up banners were designed for the Learning Practitioners' Associations new brand launch.

These accompanied the logos and A4 flyer set we designed and also the brochure / prospectus produced for the organisation as part of its ongoing re-branding exercise.

This composite curved wall stand is made up of two three panel stands with an adjoining 'ghost'panel to extend the viewable panoramic area. The background image is a 3D construction intended to convey the relative properties of the three brands - sunlight, earth and water. This set comes in wheelable bins with a lectern conversion kit and halogen spotlights.

The exhibition stand is part of a corporate identity project for the company that includes logo design, stationery, data sheet folders, vehicle livery and signage.

A substantial six stand set detailing the Tees Renewable Energy Plant Project which is currently under development.

The stands are single sided pull-up banner stands of superior quality with deep matt crystal laminated graphics. The content gives in-depth information to the public about the power plant proposal the company is presenting.

The exhibition set is supported by a substantial website and a 4-page A5 flyer.

The company's logo and stationery were also designed by SiGGA.

A four panel (+end caps) stand for this financial software developer. Consistency in the well established design motifs and content position this stand in line with the company's other publications and advertising

Two 4x3 panel stands for a rapidly expanding office supplies franchisor. The stands needed to function together and apart for flexibility at different venues and exhibitions.

This 10 metre stand for the classic car show at the NEC, Birmingham utilises two curved graphic wall ends and a joining straight panel set.

The counter has wrap around graphic panels and a central glass display case.

Here, a four panel stand set for an industrial component manufacturer. This client has taken advantage of our stand rental option, paying for their own panels and renting the stand and halogen spotlights on a weekly basis when required.

A 4x3 panel stand set for a franchise launch by a succesful car body repair company. The design echoes that of the company's brochure and related literature.

This consistent approach to the corporate identity is paramaount to developing a successful brand.

Our biggest installation to date - a 70 sq.m six stand site featuring a strong horizontal theme leading the viewer around the site in a linear fashion.

The set illustrated the advantages and impact of a proposed gas-fired power station.